Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

QoS Shaping Policy on Pix 515

I am trying to set up a traffic shaping policy for outbound traffic on a Pix 515 to restict total outbound BW to 1 mbps. Below is the config I have set up. What is happening that uploading to external sites is indeed restricted to 1 mbps but uploading to our data centre (which has a priority policy) is not restricted. Can anyone explain why this would be as I thought the shaping applied to all traffic.

access-list test extended permit ip 10.172.0.0 255.255.0.0 10.2.0.0 255.255.248.0

class-map bdc

match access-list test

class-map inspection_default

match default-inspection-traffic

class-map video

match dscp af41

class-map voice

match dscp ef

!

policy-map vpn

class voice

priority

class video

priority

class bdc

priority

policy-map enterprise

class class-default

shape average 1000000

service-policy vpn

!

service-policy enterprise interface outside

237
Views
0
Helpful
0
Replies
CreatePlease to create content