Thank you for this - it didn't work quite correctly - I get a unknown command. If I expand it to incl hash, I get a blank. However, just doing a 'sh access-list ' did give me the identifiers, just not how I expected. The nicer thing is that it gave me the hitcounts per ip address, instead of just per ACE.
RADIUS and Symantec VIP.
I will use screenshots of ASDM, and at the end I will add the required CLI commands. the diagram below show a diagram of the steps the FW goes through when using 2FA authentication:
As you can see in Fig. 1&nbs...
Unable to get signature update from cisco.com
1. Make sure the router can get name resolution. Configure the router with a proper DNS name server.
ISR4451#utd threat-inspection signature update server cisco username xxxxx password yyyyy