Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Rate limite on Pix-515E

Quick question the interface on a Pix how do I tell if their is any sort of rate filter on their?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Rate limite on Pix-515E

hey Warren

Older versions of PIX did not do rate limiting.. with the new versions such as 7.x, pix can do a little bit of rate limiting features, using QOS..

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml#rate

URL explains the function of QOS on PIX.. if there is no rate-limiting applied on the outbound interfaces, it is a pure FE/GE port, and will be able to push that much traffic !

Hope this helps.. all the best.. happy new year..

Raj

2 REPLIES

Re: Rate limite on Pix-515E

hey Warren

Older versions of PIX did not do rate limiting.. with the new versions such as 7.x, pix can do a little bit of rate limiting features, using QOS..

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml#rate

URL explains the function of QOS on PIX.. if there is no rate-limiting applied on the outbound interfaces, it is a pure FE/GE port, and will be able to push that much traffic !

Hope this helps.. all the best.. happy new year..

Raj

New Member

Re: Rate limite on Pix-515E

Thank you my version is 6.3 so I don't have a rate limit feature as you indicated. Thank you very much for the link and the explaination!!!!!!

430
Views
0
Helpful
2
Replies