Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Redirect many ports

Hi all..

Im redirecting ftp request for IP address 10.10.10.5 to 192.168.0.5 by entering the following command:

static (DMZ,inside) tcp 10.10.10.5 ftp 192.168.0.5 ftp netmask 255.255.255.255.

Its working fine.

But I need to add 20 diferents ports and redirect them to ftp port.

Do I have to add 20 diferents commands on ASA??? Or is there anyway to do that on a simple command?

Thanks!

  • Firewalling
1 ACCEPTED SOLUTION

Accepted Solutions

Re: Redirect many ports

4 REPLIES

Re: Redirect many ports

New Member

Re: Redirect many ports

Hi Andrew,

on the link, I just found redirect from one port to one port...

And I want to redirect many ports to only one port...

Can you show me an example?

Re: Redirect many ports

You mis-understand, what you want to do, I think is not possible - you must configure them 1 by 1.

New Member

Re: Redirect many ports

Oh...ok...

I really mis-understood...

Anyway...thank you about your clarify...

Regards

106
Views
0
Helpful
4
Replies
This widget could not be displayed.