Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Redundant Interfaces on ASA 5505?

I was reading about the redundant interfaces on ASA's. Can the 5505 do that? If so, does it have to have a certain iOS version or license? I can't find the commands on my Asa.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Redundant interfaces are not

Redundant interfaces are not supported on the ASA 5505 platform.

Note the configuration guide section on configuring interfaces where it distinguishes in Step 1 between the syntax for an ASA 5510 or higher and the syntax for an ASA 5505 or ASASM:

For the ASA 5510 and higher:

interface {{ redundant number port-channelnumber | physical_interface }[ .subinterface ] | mapped_name }

 

For the ASA 5505 or ASASM:

ciscoasa(config)# interface { vlan number |mapped_name }

1 REPLY
Hall of Fame Super Silver

Redundant interfaces are not

Redundant interfaces are not supported on the ASA 5505 platform.

Note the configuration guide section on configuring interfaces where it distinguishes in Step 1 between the syntax for an ASA 5510 or higher and the syntax for an ASA 5505 or ASASM:

For the ASA 5510 and higher:

interface {{ redundant number port-channelnumber | physical_interface }[ .subinterface ] | mapped_name }

 

For the ASA 5505 or ASASM:

ciscoasa(config)# interface { vlan number |mapped_name }

131
Views
0
Helpful
1
Replies