06-23-2009 04:50 AM - edited 03-11-2019 08:46 AM
hi friends,
i have one asa 5520 in data center,i got internet line from my isp .
they given two wires one is for main line and other one is redundant.they mention that two cables are connected in different switches of their side so if one switch goes off using other cable we can survive, but i need to connect two cables in same firewall . i have totally 13 ips so how i ll connect .
note : my idea is when one cable goes off using other cable it has to work.all ip's in same subnet
06-23-2009 05:28 AM
You can use the redundant interface feature-
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/intrface.html#wp1062296
06-23-2009 06:41 AM
thank you for ur link.
but i have all ips in same subnet so i cannt use other ip in the same firerwall in other interfaces like 0/2,0/3
it will say error as same subnet
06-23-2009 06:42 AM
How about creating a "outside" vlan on the ASA and assigning two physical ports to that VLAN?
06-29-2009 02:51 PM
That is the purpose of the redundant interface. You assign the IP address to a (virtual) redundant interface and then assign interfaces to the virtual interface:
interface redundant0
member interface gi0/2
member interface gi0/3
ip address x.x.x.x x.x.x.x
...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: