06-30-2008 09:19 PM - edited 03-11-2019 06:07 AM
Dear sir,
We have cisco asa5520 firewall and we have two different isp links now we want to maintain two different networks through this firewall(we want to use two separate gateways through this )Is it possible to do like this.Some body has told me to to do like that firewall has been on multicast mode .So how can i do that ,Any document plz.
Thanks&Regards
srini
Solved! Go to Solution.
07-01-2008 12:03 AM
It is called 'multiple context' mode. Here is a sample config:
Please rate helpful posts.
Regards
Farrukh
07-01-2008 12:56 AM
Hi Srini,
Do you want to have One single FW connecting to the 2ISP's or you need Two FW's (context mode) ?
You need to check your requirements because there are some restrictions when you configure the ASA FW in multiple context mode.
Services like VPN, dynamic routing protocols etc won't work.
You can also check this sample configuration on Cisco site for Multiple ISP configuration.
07-01-2008 12:03 AM
It is called 'multiple context' mode. Here is a sample config:
Please rate helpful posts.
Regards
Farrukh
07-01-2008 12:56 AM
Hi Srini,
Do you want to have One single FW connecting to the 2ISP's or you need Two FW's (context mode) ?
You need to check your requirements because there are some restrictions when you configure the ASA FW in multiple context mode.
Services like VPN, dynamic routing protocols etc won't work.
You can also check this sample configuration on Cisco site for Multiple ISP configuration.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide