Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Reg:pix 501

Dear sir,

Pls send me the command of telnet asscess and ssh access for global access firewall is Csico 501

Regards

srinivas.D

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: Reg:pix 501

Hi

Assuming you mean to telnet/ssh onto the pix

telnet 192.168.1.1 255.255.255.255 inside

ssh 192.168.1.1 255.255.255.255 inside

The above commands will allow the host 192.168.1.1 to telnet and ssh to the pix firewall.

Note with ssh there are few other things you need to setup

1) Pis must have a hostname

2) The domain-name on the pix

3) Generate keys

4) save keys

HTH, let me know if i have misunderstood

Jon

1 REPLY
Hall of Fame Super Blue

Re: Reg:pix 501

Hi

Assuming you mean to telnet/ssh onto the pix

telnet 192.168.1.1 255.255.255.255 inside

ssh 192.168.1.1 255.255.255.255 inside

The above commands will allow the host 192.168.1.1 to telnet and ssh to the pix firewall.

Note with ssh there are few other things you need to setup

1) Pis must have a hostname

2) The domain-name on the pix

3) Generate keys

4) save keys

HTH, let me know if i have misunderstood

Jon

135
Views
0
Helpful
1
Replies
CreatePlease to create content