Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Reg. routing issue

Hi halijenn / pkampana / all

I have an issue where there are overlapping networks at inside and outside of ASA hence is it possible in the ASA that i can segregate the traffic by means of routing or NATTING ?

(192.168.16.0) Router (at WAN Branch) -----Switch ---(Outside)ASA(Inside)----Switch ----Router1----Router2 (192.168.16.0)

  • Firewalling
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Reg. routing issue

Ankur,

I had answered a similar thread a while ago. Spent quite a bit of time coming up with the lines that he needed. Unfortunately he decided not to implement.

You can read here: https://supportforums.cisco.com/message/3046434#3046434

Refer this link: http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/nat_static.html#wp1082664

-KS

3 REPLIES
Cisco Employee

Re: Reg. routing issue

yes, you can do it by NATing subnets.

One of the ways to do it is with outside NAT:

http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/nat_static.html#wp1082664

Possible orther include policy or straight static NAT.

Marcin

Cisco Employee

Re: Reg. routing issue

Ankur,

I had answered a similar thread a while ago. Spent quite a bit of time coming up with the lines that he needed. Unfortunately he decided not to implement.

You can read here: https://supportforums.cisco.com/message/3046434#3046434

Refer this link: http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/nat_static.html#wp1082664

-KS

New Member

Re: Reg. routing issue

thanks a lot kusankar & Marcin !

161
Views
0
Helpful
3
Replies
This widget could not be displayed.