Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

Regarding SIP trunk soultion with 5512 ASA

Hi,

Can we directly patch the SIP TRUNK on the ASA 5512 Interface.

 

Actually we are looking for  a solution.

Our client want to install  the dialer server at their end remote site . and user on our side access the dialer through MPLS link and outbound calls will be generated directly from the sip Trunk.. so now question is can we directly patch the SIP trunk cable on on asa Interface. will it work.

Topology

user --- 0//0 interface of ASA (users behind the interface)

mpls --- 0/2 interface of ASA  (connecting to remote client site where actually we would want to install the dialer server )

dmz  ----0/1 interface of ASA

0/3 is free on the ASA.

so will it work if we connect the SIP trunk directly on the ASA interface?

will SIP trunk authenticate with the Dialer server at remote side?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

50
Views
0
Helpful
0
Replies
CreatePlease to create content