Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Remote and Local subnet is the same when coming through VPN

When my client uses a remote VPN connection into the central office, his local subnet and central office is in the same IP address scheme. This causes an issue when he wants to connect to servers in the central office.

Is there a way out of this ??

1 REPLY

Re: Remote and Local subnet is the same when coming through VPN

u mean the problem with makeing ACL for nat exmption right ?

if this the case

subnet the network into more sosific subnet VLSM

for example lets say the internal network is 192.168.1.0/24

and the vpn users use 192.168.1-14

then u may consider the 192.168.1.0 255.255.25.240 is the vpn subnet and match for nat examption and the rst for the local network

just the idea

good luck

if helpful Rate

111
Views
0
Helpful
1
Replies