Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

Remote Desktop Connection Via 2 ASA FW

Hi Gentlemen,

                   Could any one help to advise the remote desktop connection between the 2 ASA 5510 FW IP Sec Tunnel connection?

I have already setup the the 2 remote sites via the 2 ASA FW IPSec Tunnnel and would like to remote desktop to Site A from the Site B. But one of the problem PC ( Windows XP Professional ) is still having problem to remotely connect.When I remote desktop to that PC, the remote desktop window pop up but the login screen didn't show up and finally it time out . I' m able to ping that PC and remote desktop connnection port is als opened as well.

From the command prompt

c:\ telnet 192.168.1.x 3389

( The port is opened ) .

The Current Config is as per attach file.

1 REPLY
New Member

Re: Remote Desktop Connection Via 2 ASA FW

Hi Nay!

Perhaps you can try adjusting the mss.  You can do this with the following command:

sysopt connection tcpmss 1300

Default is 1380...

You can give that a try.

Cheers!

395
Views
0
Helpful
1
Replies
CreatePlease to create content