I have configured Remote VPN access terminating at ASA5510 successfully.Remoye client is getting the IP assigned by the ASA,but that I am not able to ping the ASA inside Interface IP address and not able to ping any PCs which are in inside network from the remote client through the tunnel.
But where as I can ping the remote client's ip address from the ASA.
Check whether "NAT traversal" command is enabled on the router. If NAT-T is not enabled, VPN Client users often appear to connect to the PIX or ASA without a problem, but they are unable to access the internal network behind the security appliance.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...