10-20-2014 09:22 AM - edited 03-11-2019 09:57 PM
Ok, I have change a VPN tunnel from Split tunnel to tunnel all traffic.
When I try to remove the ACL lines for the split tunnel I was getting deny.
ASA(config)# no access-list test_split_tunnel line standard permi$
no access-list test_split_tunnel line 1 standard permit 192.168.1.0 255.255.0.0
^
ERROR: % Invalid input detected at '^' marker.
I want to remove all the lines like line 1
This VPN connection is setup on Anyconnected, IOS 9.0, this VPN is working no issue I can find yet.
Any help with this would be great
Thank you
Solved! Go to Solution.
10-21-2014 02:26 AM
Hi,
Try removing with "line 1":-
no access-list test_split_tunnel standard permit 192.168.1.0 255.255.0.0
It should work.
Thanks and Regards,
Vibhor Amrodia
10-21-2014 02:26 AM
Hi,
Try removing with "line 1":-
no access-list test_split_tunnel standard permit 192.168.1.0 255.255.0.0
It should work.
Thanks and Regards,
Vibhor Amrodia
10-21-2014 06:04 AM
Thank you very much Vibhor
That work great, I am glad it was something so simple
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide