Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

remove split tunnel ACL list

Ok, I have change a VPN tunnel from Split tunnel to tunnel all traffic.

When I try to remove the ACL lines for the split tunnel I was getting deny.

ASA(config)# no access-list test_split_tunnel line  standard permi$

no access-list test_split_tunnel line 1 standard permit 192.168.1.0 255.255.0.0
                                        ^
ERROR: % Invalid input detected at '^' marker.

 

I want to remove all the lines like line 1 

This VPN connection is setup on Anyconnected, IOS 9.0, this VPN is working no issue I can find yet.  

Any help with this would be great

 

Thank you

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Hi,Try removing with "line 1"

Hi,

Try removing with "line 1":-

no access-list test_split_tunnel standard permit 192.168.1.0 255.255.0.0

It should work.

Thanks and Regards,

Vibhor Amrodia

2 REPLIES
Cisco Employee

Hi,Try removing with "line 1"

Hi,

Try removing with "line 1":-

no access-list test_split_tunnel standard permit 192.168.1.0 255.255.0.0

It should work.

Thanks and Regards,

Vibhor Amrodia

New Member

Thank you very much Vibhor

Thank you very much Vibhor 

That work great, I am glad it was something so simple 

 

74
Views
0
Helpful
2
Replies
CreatePlease to create content