Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

Required OID number to Monitoring Current host count

Hello all .

I can get the current host count running below command .

sh local-host connection

Detected interface 'outside' as the Internet interface. Host limit applies to all other interfaces.

Current host count: 10, towards licensed host limit of: 50

I need the Device OID which holds that information under system MIB's  .

Kind Regards

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Required OID number to Monitoring Current host count

Hi,

Unfortunately, the ASA does not have an OID for these stats.

Sincerely,

David.

3 REPLIES
Cisco Employee

Required OID number to Monitoring Current host count

Hi,

Unfortunately, the ASA does not have an OID for these stats.

Sincerely,

David.

New Member

Required OID number to Monitoring Current host count

Thank you is there any way i can check the same status on the ASDM ?

Cisco Employee

Required OID number to Monitoring Current host count

Unfortunately, no.  ASDM does not provide this capability natively.  You can use the CLI interface within ASDM, but I don't think that is what you were looking for.

Sincerely,


David.

227
Views
0
Helpful
3
Replies
CreatePlease to create content