Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

Restore problem on ASA5505

Hi, I have a problem with restore config on Cisco ASA5505, on the first 5505 I have made a config backup form the GUI:
tool --> backup configuration --> backup all

now on the second ASA5505 (with the factory value) from the GUI:
tool --> restore configuration --> backup.zip --> restore all

the restore procedure is completed without error, then 'reload' but the configuration isn't changed !
the ip address and the all others settings aren't changed.
Thanks.

-

Salvatore.

2 REPLIES

Re: Restore problem on ASA5505

I don't use ASDM, but there should be a Save button that you'll need to click to save the configuration. You could go to the CLI and type write memory and that would save the config.

Hope it helps.

New Member

Re: Restore problem on ASA5505

Hi, I have tried with 'Save' and 'write memory' but with both command the configuration isn't changed, then I have used the CLI with tftp server and the restore procedure is ok ! but with GUI the problem is always present.

Thanks.

-

Salvatore.

400
Views
0
Helpful
2
Replies
CreatePlease to create content