Hi all, i'm going slightly mad trying to sort this.
I have a PIX 515 reset to factor default, I'ved assigned an IP in the same subnet as my TFTP server.
I believe I need to use the following command to restore the configuration. (Note I have tried it via config t and copy and paste but some of the lines of the config error so I'm hoping this is more reliable).
I'm doing the following -
configure net [<location>]:[<pathname>]
I'm following this but am unsure of that the location and path name should be
example - tftp-server 10.1.1.42 /pixfirewall/config/test_config
My TFTP server is 192.168.106.10 and my PIX has 192.168.106.3. My config file "BackupConfig" is in the root of the TFTP directory
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...