Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Reverse NAT

Hi All,

I've got an interesting situation trying to get NAT working properly with a Cisco ASA 5510.

The Outside interface of the ASA is set as a public routable assigned to us by our ISP. Our ISP also routes several other networks (3 class C networks) to us. What I need to do is to NAT all of the IPs in these additional subnets to one single IP on the internal network.

Some other details:

Internal Network: 10.1.1.0/24

Internal Host (CSS11501): 10.1.1.65

ASA Inside Interface IP: 10.1.1.1

ASA Outside Interface IP: 207.67.38.17

ASA Outside Network: 207.67.38.16/29

Additional Networks: 164.110.112.0/24, 164.110.113.0/24, 207.74.12.0/24

NB: Networks/IPs have been changed to protect the innocent.

I have tried implementing the above with dynamic NAT rules with the "real" IPs on the outside interface and a single-IP NAT pool on the inside interface, but it doesn't seem to be working.

Any pointers on how I can achieve such a setup with a Cisco ASA5510?

1 REPLY
Hall of Fame Super Blue

Re: Reverse NAT

Hi

Could you post relevant config. I would have thought the following should work

nat (outside) 1 164.110.112.0 255.255.255.0 outside

nat (outside) 1 164.110.113.0 255.255.255.0 outside

nat (outside) 1 207.74.12.0 255.255.255.0 outside

global (inside) 1 "ip address"

Jon

555
Views
0
Helpful
1
Replies