Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

reverse natting on PIX535 ver 7.2

Dear All

I tried to translate global IP( Ip address on outside) to local IP (Inside)

but i couldn't find the right commands to do it.

Thank you in advance

5 REPLIES
Hall of Fame Super Blue

Re: reverse natting on PIX535 ver 7.2

Hi

Global address 217.10.93.10

local address 192.168.5.1

static (outside,inside) 192.168.5.1 217.10.93.10 netmask 255.255.255.255

HTH

Jon

New Member

Re: reverse natting on PIX535 ver 7.2

I tried the static solution but doesnt work

Hall of Fame Super Blue

Re: reverse natting on PIX535 ver 7.2

Hi

Could you post exact details of what you are trying to do.

Jon

New Member

Re: reverse natting on PIX535 ver 7.2

OK, this is what i need to do

I have an Ip address on outside with 199.9.9.9 and i want this IP to be translated to 10.0.0.9 when it comes to inside, is it possible??

Hall of Fame Super Blue

Re: reverse natting on PIX535 ver 7.2

Hi

199.9.9.9 is the source or the destination IP address. If it is the source

static (outside,inside) 10.0.0.9 199.9.9.9 netmask 255.255.255.255

If it is destination

static (inside,outside) 199.9.9.9 10.0.0.9 netmask 255.255.255.255

Jon

121
Views
0
Helpful
5
Replies