round robin on asa?

[support.edm]

Is it possible to configure the ASA to act like a load balancer? What I would like to do is have people hit a real internet external ip address and have it direct traffic to 1 of 2 servers. In essence, it would just do a round robin and direct one request to one server and the next request direct to the next server, etc.

[umedryk]

I think your configuration is possible. The below URL explains about Remote VPN Client Load Balancing on ASA 5500. Load balancing is the ability to have Cisco VPN Clients shared across multiple Adaptive Security Appliance (ASA) units without user intervention. Load-balancing ensures that the public IP address is highly available to users. For example, if the Cisco ASA that services the public IP address fails, another ASA in the cluster assumes the public IP address.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805fda25.shtml#prereq

[mdombek_biz]

If I understand you correct you are requesting something like

static (inside,outside) publicIP, privateIP_1, privateIP_2 mask 255.255.255.255

to send traffic from you ASA public IP address to two different inside IP addresses.

Well no this feature is not supported.

Sorry