Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Routing issue when using Remote access

Hi All,

I have the following setup:

layer 3 Switch --192.168.1.x/24-- ASA5520 --192.168.7.x/24-- Internet Router ----- VSAT

I have configured the Internet Router to do PATing for the DATA VLAN on the L3 Switch. I have also configure the Internet Router to redirect any request for UDP 500 to the Outside Interface of ASA5520

I am able to establish a VPN tunnel which successfully terminates on the Outside interface of the ASA5520, however i am having a problem pinging the internal vlans (such as the DATA VLAN).

I have set the ASA5520 with the "tunneled default route".

Any ideas to trouble this problem??

1 REPLY
New Member

Re: Routing issue when using Remote access

I didn't include the IPsec NAT-Traversal on the ASA5520...its working fine now

108
Views
5
Helpful
1
Replies