Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

routing issues on PIX

I am at a Customer Site. We need to have our PIX 515 ship some traffic that will originate from connected VPN clients to some inside networks.

The networks that we need to reach are:

10.224.164.0.24

10.224.165.0/24.

This is the configured routes on the PIX (i cut and pasted this in)

s1fwbri01# sho route

outside 0.0.0.0 0.0.0.0 216.30.179.129 1 OTHER static

Servers_Private 10.9.1.0 255.255.255.0 10.9.1.1 1 CONNECT static

Servers_Private 10.10.0.0 255.255.128.0 Tunnel1-Internal 1 OTHER static

inside 10.224.0.0 255.255.0.0 10.224.204.6 1 OTHER static

inside 10.224.164.0 255.255.255.0 10.224.204.2 1 OTHER static

inside 10.224.165.0 255.255.255.0 10.224.204.2 1 OTHER static

inside 10.224.202.0 255.255.254.0 10.224.204.6 2 OTHER static

inside 10.224.204.0 255.255.255.248 10.224.204.1 1 CONNECT static

outside 216.30.179.128 255.255.255.128 216.30.179.132 1 CONNECT static

I am not sure if the "route 10.224.0.0 statement may be overidinig the subnetted routes to 10.224.202, 165, etc.

What do I need to do to ship traffic to networks 10.224.164.0 and 10.224.165.0??

thx

1 REPLY
Gold

Re: routing issues on PIX

From the PIX, can you ping anything in the networks 10.224.164/10.224.165?

is the 10.224.0.0/16 route necessary?

106
Views
0
Helpful
1
Replies
CreatePlease to create content