Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Routing Question with Cisco ASA 5505 with 2 "Active" WAN Connections

We currently have a Cisco ASA 5505 Security Plus.  I am looking to bring in a seperate circuit to handle our SIP trunks.  I am not talking about an active/standby or failover setup.  Can I achieve this with a simple route statement?  Here is some backgound...

Interfaces:

Inside (VLAN1) 192.168.1.1 (security = 100)
Outside (VLAN2) 50.50.50.2 (security = 0)
VoIP (VLAN3) 60.60.60.2 (security = 50)

Can I just add the 2nd route statement to redirect all traffic for my SIP provider's switch which is located at 99.99.99.99?

route outside 0.0.0.0 0.0.0.0 50.50.50.1 1
route voip 99.99.99.99 255.255.255.255 60.60.60.1 1

I suspect the answer is yes and that I possibly just trying to overthink this issue.

Thanks,
Todd -

 

 

  • Firewalling
1 ACCEPTED SOLUTION

Accepted Solutions

Hi , Yes this possible , to

Hi ,

 Yes this possible , to route specific traffic via gateway . Ensure inspect sip is enabled on global policy for your SIP traffic .

 

HTH

Sandy

2 REPLIES

Hi , Yes this possible , to

Hi ,

 Yes this possible , to route specific traffic via gateway . Ensure inspect sip is enabled on global policy for your SIP traffic .

 

HTH

Sandy

New Member

Yes, it does.Thanks!!Todd -

Yes, it does.

Thanks!!
Todd -

60
Views
0
Helpful
2
Replies
This widget could not be displayed.