Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Routing truble on PIX

Hello.

Routing truble on PIX ??

inside PC-10.100.4.111 can't connected to remote sites PC-10.100.110.111 etc..

the pix are default gateway on PC.

It's some way to do this ?

I have one PIX525 Version 7.2(2)

two VPN3005 Version 4.7.2.L

one WS-C4006 Version 12.1(20)EW

I have a main site connected to internett with a WS-C4006 router

passing traffic to PIX and VPN3005 with there global IP addresse.

The remote site's are connected to VPN3005-1

14 remote site IP 10.100.110.0/24 10.100.120.0/24 etc... (routers C1800..)

--- Confiuration: -------------------------

PIX525

outside = Global-IP.254

inside = 10.100.4.250/24

route outside 0.0.0.0 0.0.0.0 Global-IP.1 1

route inside 10.100.110.0 255.255.255.0 10.100.4.251 1 (?? Not working)

VPN3005-1 (this is use for remote site office)

Public = Global-IP.251

Private = 10.100.4.251

VPN3005-2 (this is use for vpn Client only)

Public = Global-IP-252

Private = 10.100.4.252

-------------------------------------------

Thanks for your help

Tor

2 REPLIES
Silver

Re: Routing truble on PIX

Your Routing looks like a good if your scenario as below:

Internal Network -->E0 Router E1 --> {Inside}PIX {Outside}---> ISP ROUTER

Can You show mw whole configuration:

You should look on NAT.

Regards,

Dharmesh Purohit

Community Member

Re: Routing truble on PIX

The are none router inside

I------------------I

I Internal Network I --> 10.100.4.1 {Inside} PIX 128.39.184.254 {Outside} --> ISP Router

I Internal Network I --> 10.100.4.251 (Private)VPN3005-1 128.39.189.9 (Public) --> ISP Router

I Internal Network I --> 10.100.4.252 (Private)VPN3005-2 128.39.189.129 (Public) --> ISP Router

I------------------I

Regars,

-Tor

130
Views
0
Helpful
2
Replies
CreatePlease to create content