Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Run DHCP server in PIX FW

I am trying to configure a pix firewall 506 E SW(6.3 (5))to run DHCP server for its inside hosts. Below is the config. For some reason, hosts say they are unable to contact the DHCP server to get leases. Any help on this is highly appreciated.

Inside interface ip is 192.168.1.1

dhcpd address 192.168.1.10-192.168.1.100

dhcpd dns 192.168.1.7

dhcpd lease 11520

dhcpd enable inside

dhcpd domian mydomain.com

2 REPLIES

Re: Run DHCP server in PIX FW

Tell pix which interface the dhcp range will be used under.

e.i

dhcpd address 192.168.1.10-192.168.1.100 inside

New Member

Re: Run DHCP server in PIX FW

Hi,

thanks for the quick reply. When I applied the command dhcpd enable inside, it automatically changed the command to dhcpd address 192.168.1.10-192.168.1.100 inside. Will run a packet capture and see if it helps.

115
Views
0
Helpful
2
Replies
CreatePlease to create content