Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

run PIX 515e v7.2 configuration on ASA 5510 8.2

Will a configuration file from a PIX 515e running version 7.2 be able to run on a new ASA 5510 running ver. 8.2?  In other words, can the configuration file be successfully merged with the configuration file on a ASA 5510, or do I have to reconfigure the named objects, ACLs, VPN configurations, etc.?




Re: run PIX 515e v7.2 configuration on ASA 5510 8.2


The configuration will work but before that you need to consider the below one.

The interfaces details (name of the interface and security level ) of the both PIX and ASA's it should be match.else all the ACLs will be inactive

ASA should not have any old configuration that is it should not have objects and rules.else it will afftect the new object details which you are going to copy from PIX.

The ASA should be factory default configuration..



Cisco Employee

Re: run PIX 515e v7.2 configuration on ASA 5510 8.2

If you follow this upgrade procedure it will work.

Upgrading Between Major Releases

To ensure that your configuration updates correctly, you must upgrade to each major release in turn. Therefore, to upgrade from Version 7.0 to Version 8.2, first upgrade from 7.0 to 7.1, then from 7.1 to 7.2, and finally from Version 7.2 to Version 8.2 (8.1 was only available on the ASA 5580).

First upgrade the PIX to 8.2.

Then you can manually configure the interfaces on the ASA and copy and paste the rest from the PIX.