01-17-2012 08:46 AM - edited 03-11-2019 03:15 PM
Hello,
I had heard scansafe scanning was being added to the ASA. Is that currently available? Any links are appreciated.
Thanks.
Solved! Go to Solution.
01-17-2012 09:36 AM
Yes, the ASA (8.3/8.4) can be configured to port forward to Scansafe Cloud. You use the AnyConnect Profile Editor in ASDM to configure the Scansafe scanning proxies. (You will need to be using AnyConnect 3.0 clients.)
01-17-2012 09:36 AM
Yes, the ASA (8.3/8.4) can be configured to port forward to Scansafe Cloud. You use the AnyConnect Profile Editor in ASDM to configure the Scansafe scanning proxies. (You will need to be using AnyConnect 3.0 clients.)
01-17-2012 09:41 AM
Thanks. So it is only for remote access clients (not for internal clients behind the ASA)?
01-17-2012 10:02 AM
Kind of.
Whether for secure mobility clients (AnyConnect) or internal clients the ASA itself just acts as an intercept point for traffic that your policy has chosen to be proxied by Scansafe. (This could be hardware such as an Ironport WSA or the cloud-based SaaS scansafe service.) The ASA is set up using WCCP to redirect interesting traffic to the WSA or ScanSafe proxy for inspection and action.
I'm sure your account team or reseller would be happy to give you an overview or demo.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: