Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Searching object-group

In ASA 8.0(4) the following command is not working?? Any Idea.

show object-group id GE-TP-UNITS

Apart from this can I know the tips and tricks to search object/object-group/ip/access-l in ASA and PIX...

3 REPLIES
New Member

Re: Searching object-group

I sometimes have troubles with object groups as well...

You can do "show run object-group id GE-TP-UNITS"

And for tips/tricks, I would just suggest if you can't find it with a specific command, just use the "show run | i" or "show run | be"

You can also do "show run access-list", "show run static", "show run nat", "show run global"

These are the common ones I use.

Hope this helps!

New Member

Re: Searching object-group

Also, here is a link to all the "show run " commands

http://www.cisco.com/en/US/docs/security/asa/asa82/command/reference/s5.html

New Member

Re: Searching object-group

you can add grep to search for specific object group name

sh run | grep object-group
343
Views
0
Helpful
3
Replies
CreatePlease to create content