Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Seperating traffic type based on dest interface


At my old company we had an asa 5510 with a t1 connection and a DSL connection. Somehow we had SMTP and vpn route through the t1 and http etc through the dsl. I remember seeing the config and it was a really simple conf! But i cant figure out how it was done!

I have a 5505 with the sec plus, and i have 2 diff isp connections, I wanted to route specifficly HTTP&(S) and dns through one interface and all traffic out of the other, simple enough? but i cant figure it out! I know exactly how to do it with a router using route-maps....ugggg. I do remember another thing it did too! it would actually direct the dsl traffic over the t1 if the dsl failed, but this was not a backup isp config! (base 5510) it was like 2 type of default routes, i think..... I remember it was explicitly stating smtp and https over the t1 and w/e else over dsl.....

Save me....


New Member

Re: Seperating traffic type based on dest interface

You could NAT the Internal traffic to different external IP Addresses based upon access-lists to define the traffic types.

nat (inside) X access-list YYY

That way you'd be able to differentiate or route the traffic differently at the router.

Hope that helps,