05-11-2007 10:05 AM - edited 03-11-2019 03:13 AM
Recently I put a context firewall up between our VPN concentrators and our inside network. Users have been complaining of getting timed out in applications like TELNET.
I'm sure what is happening is the firewall is dropping the xlate after a period of time without activity. If this is under "timeouts" in advanced settings what value do I need to change to allow them longer idle times in telnet?
Solved! Go to Solution.
05-12-2007 02:32 PM
Try enabling NAT-T on the concentrator.
05-11-2007 10:21 AM
timeout connection
default is 1 hour.
Thanks,
Chad
05-11-2007 10:25 AM
Thanks Chad. Thats what I thought. But users are reporting getting disconnected after 3 mins. Any suggestions? This only started happening after I put the 3030 outside a 6513 FWSM context firewall.
05-12-2007 02:32 PM
Try enabling NAT-T on the concentrator.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide