Your Phase2 configuration seems straght forward, you may want to add couple of statements for your l2l as will be needed otherwise it will not work. where is your Phase1 configuration? what pertains to isakmp policy.
This is part of Ipsec Phase2
crypto isakmp enable outside(Enables outside interface as your l2l vpn tunnel point )
crypto map outside_map interface outside( defines your crypto map to be bound to outside interface)
Also make sure the other end of tunnel agrees on these settings, and that oposite side have access-list the other way around.
Other side of tunnel similarly access list
acces-list inside_outbout_nat0 permit ip 10.254.0.0 255.255.255.255 10.0.0.9 255.255.255.0
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...