Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

show conn details

Hi

Can u anybody  explain what do mean by saA when show connection details command is excuted.

6 REPLIES
Red

show conn details

You can follow this command reference for the connection flags:

http://www.cisco.com/en/US/docs/security/asa/asa82/command/reference/s2.html#wp1396672

Hope that helps.

Thanks,

Varun

Thanks, Varun Rao Security Team, Cisco TAC
New Member

show conn details

Hi Varun,

I geeting the below output

tcp outside 10.17.x.x :3389 inside 172.18.x.x :3166  idle 0:00:00 bytes 0, flags saA

from the above output i think syn request is going to 10.17.x.x but there is no response from that server is it correct ?

show conn details

Standard TCP protocol requires that the receiver respond to an initial SYN packet with a SYN ACK.

The flags saA indicate that we saw a SYN from an inside client and are awaiting the SYN ACK (sa) from the outside host

and then the ACK (A) from the inside host in response to the SYN ACK.

New Member

show conn details

so that is what i want to know request is going from inside but there is no response from outside (far end)

is it correct

show conn details

thats correct.

New Member

show conn details

Thank you

650
Views
9
Helpful
6
Replies