I've got a sip client that I know works fine (tested with another modem/firewall). Since moving my access across to a new 1812 I can no longer hold up a SIP session.
The SIP device sits in a DMZ but according to the logs its still getting dropped packets.
.Aug 12 09:06:29.552: %FW-6-DROP_PKT: Dropping udp session xx.xxx.xxx.xxx:5060 xxx.xxx.xxx.xxx:5060 on zone-pair WAN-self class class-default due to DROP action found in policy-map with ip ident 0 .Aug 12 09:06:42.633: %FW-6-LOG_SUMMARY: 5 packets were dropped from xxx.xxx.xxx.xxx:5060 => xxx.xxx.xxx.xxx:5060 (target:class)-(WAN-self:class-default) .Aug 12 09:07:01.057: %FW-6-DROP_PKT: Dropping udp session xxx.xxx.xxx.xxx:5060 xxx.xxx.xxx.xxx:5060 on zone-pair WAN-self class class-default due to DROP action found in policy-map with ip ident 0
Not sure why... not even shure why its looking at the WAN-self class ? After around 2mins the call goes silent sender and receiver can not hear or speak to each other.
I've attached my current config.
let me know what other info you need, its driving me crazy.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...