Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Site to Site Doc Clarification, please

In the following doc:

http://www.cisco.com/en/US/docs/security/asa/asa80/getting_started/asa5505/quick/guide/5505GSG.pdf

Page 150 is not clear. In the example, they have test for local networks and 209.165.200.225 for remote. I am not sure what is test? Base on the example diagram on page 140, would it be 10.10.10.0/24 for the entry under local networks and 10.20.20.0/24 for remote networks? or 209.165.200.226 for local netwoks and 209.165.200.236 for remote networks?

2 REPLIES
Hall of Fame Super Blue

Re: Site to Site Doc Clarification, please

Patrick

Your'e not the only one who is confused :-). I generally don't use ADSM rather i use the CLI but the example still doesn't make any sense.

The local and remote networks are 10.10.10.0/24 and 10.20.20.0/24 so i can only assume that this is a mistake in the documentation.

Jon

Bronze

Re: Site to Site Doc Clarification, please

Hi there,

In security appliance 1, the 'test' would mean 10.10.10.0. The remote network should be 10.20.20.0.

As the outside of both devices are on the public network, neither traffic from 209.165.200.226 nor 209.165.200.236 should be encrypted.

The screen looks like it is defining the interesting traffic for the tunnel, and should not incorporate traffic from either outside address.

101
Views
0
Helpful
2
Replies