Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Site to site VPN is not working btwn PIX 506 and ASSA 5505

These are not wroking for me. Please help

Setting on PIX 506:--


access-list 101 permit ip 192.168.20.0 255.255.255.0 192.168.12.0 255.255.254.0


sysopt connection permit-ipsec
crypto ipsec transform-set itsuport esp-des esp-md5-hmac
crypto map transam 1 ipsec-isakmp
crypto map transam 1 match address 102
crypto map transam 1 set peer x.x.x.x
crypto map transam 1 set transform-set itsuport


crypto map transam interface outside
isakmp enable outside
isakmp key IT5ngr13v address x.x.x.x netmask 255.255.255.255
isakmp identity address
isakmp policy 1 authentication pre-share
isakmp policy 1 encryption des
isakmp policy 1 hash md5
isakmp policy 1 group 1
isakmp policy 1 lifetime 1000

thanks

Amardeep Rana

2 REPLIES
Cisco Employee

Re: Site to site VPN is not working btwn PIX 506 and ASSA 5505

Hi Amardeep,

I see that your crypto map is configured to match ACL 102, but the ACL you posted is 101--was that just a typo?

Also, can you post the configuration on the ASA side as well?

-Mike

Cisco Employee

Re: Site to site VPN is not working btwn PIX 506 and ASSA 5505

Also, this link may help you--it shows config examples for a site-to-site tunnel between a PIX and an ASA 5505:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080950890.shtml

Hope that helps.

-Mike

219
Views
0
Helpful
2
Replies
CreatePlease to create content