Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Site to site VPN w/ Remote access config

I have a main site in USA and a remote site in the UK (w/ 3 users). I have a 5510 in the USA and will be installing a 5505 in the UK. I want to create a site-to-site VPN between the sites and direct all internet traffic from the UK through the 5510 in the USA for filtering and logging. Also I need the UK computers to access my exchange server in the USA.

Also, the manager in the UK travels so I want him to have SSL-VPN access to the UK office while he is on the road.

For the site-to-site, do I just configure a simple IPsec VPN on each ASA? What command do I need to direct the internet traffic to the 5510?

2 REPLIES
Silver

Re: Site to site VPN w/ Remote access config

You can configure Site-to site VPN using ASDM. Site-to-site VPN features provided by the adaptive security appliance enable businesses to extend their networks across low-cost public Internet connections to business partners and remote offices worldwide while maintaining their network security. A VPN connection enables you to send data from one location to another over a secure connection, or tunnel, first by authenticating both ends of the connection, and then by automatically encrypting all data sent between the two sites.

Bronze

Re: Site to site VPN w/ Remote access config

I believe you'll have to specify 0.0.0.0/0.0.0.0 as the network for the main site.

Also the 5505 in the remote UK office will need a static route for the public IP of your main office. Something like "route outside 1.2.3.4 255.255.255.255

99
Views
0
Helpful
2
Replies