Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

SNMP-MIB-ASA 5505-IPSEC and IKE tunnel

Dear All,

Is it possible to monitor the number of IPSEC and IKE tunnel sessions and individual tunnels through a NMS(Solarwinds€). If yes what would be the SNMP MIB suitable to Cisco Adaptive Security Appliance Software Version 7.2(4) Device Manager Version 5.2(4)

Where can find the same.

Thanks

2 REPLIES

Re: SNMP-MIB-ASA 5505-IPSEC and IKE tunnel

Hi Shibu,

1.3.6.1.4.1.9.9.171.1.3.2.1.5 will give you a list of the active IPSEC tunnels. This is the only MIB I have used in the past.

Hope that helps.

-Mike

Community Member

SNMP-MIB-ASA 5505-IPSEC and IKE tunnel

Check

http://www.vpnttg.com/

Advantage   of VPNTTG over other SNMP based monitoring software’s is  following:   Other (commonly used) software’s are working with static OID  numbers,   i.e. whenever tunnel disconnects and reconnects, it gets  assigned a  new  OID number. This means that the historical data, gathered  on the   connection, is lost each time. However, VPNTTG works with VPN  peer’s  IP  address and it stores for each VPN tunnel historical  monitoring  data  into the SQL server and into the RRD (Round Robin  Database) file.

HTH

724
Views
0
Helpful
2
Replies
CreatePlease to create content