Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Bronze

SNMP polling- CPU utilization of FWSM

I've been trying to poll FWSM for SNMP data and I am having selective success. For example I am not getting CPU data but I can see memory data. From FWSM guide I confirm that it should respond to 'ciscoProcessMiB' but in MIB browser of my polling station, I can see that FWSM always return zero for this MIB value.

Any thoughts?

1 REPLY

Re: SNMP polling- CPU utilization of FWSM

You need to use the following OID to get the FWSM CPU details, this is in the CISCO-PROCESS-MIB AFAIR

average ( select 1.3.6.1.4.1.9.9.109.1.1.1.1.5 )

OR

average ( select cpmcputotal5min )

Even tough this link is for IOS, it should help:

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a94.shtml

Regards


Farrukh

1241
Views
0
Helpful
1
Replies
CreatePlease to create content