cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
733
Views
5
Helpful
1
Replies

SNMPtrap delay in sending for ASA

seanwaite
Level 1
Level 1

I am trying find a solution to having snmp trap sent from the ASA, but delayed by 1-2 minutes after the event that triggered.

 

Background- The ASA is using SLA feature providing redundant backup on 2nd interface connecting to a cellular modem. The ASA is remote tunneling back to me where NMS\trap receiver & server monitors remote devices as well as the ASA itself. I have configured syslog monitor for event 622001 and snmp to send syslog. However when an interface goes down, the trap is instantaneous where as there is a delay in both the SLA to switch to the backup interface, and for the tunnel to reconnect through that backup. I have configured a snmp host in lab here that is outside the tunnel so I am no longer necessarily dependent on that being up

 

In short, I need an alarm, just cant be sent instantly 

1 Reply 1

Hello @seanwaite

 

with SNMP traps probably you can´t.  However, Netflow allows this with the command "flow-export delay flow-create 10". Make sure Netflow has the trap you need and give it a try.

 

 

-If I helped you somehow, please, rate it as useful.-

Review Cisco Networking products for a $25 gift card