Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

solved

issue resolved

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions

urgent help required-unable to ping(going to deploy ACE)

Hello Santosh,

I do not see anything wrong on the information you have provide us, now we can see that the FWSM is replying to all the ICMP request received from the ACE, next thing to do wiill be to create a capture on the FWSM to see if is seeing the traffic go and comming or if somehow is being blocked.

So please create the following capture:

access-list TEST permit icmp host ACE host FWSM

access-list TEST permit icmp host FWSM host ACE

capture TEST access-list TEST interface  ACE-FWSM

Also please create the following capture on the FWSM

capture asp type asp-drop all

And then provide us the following outputs:

1-Show capture TEST

2-Show capture asp | include ACE

Note: On this captures you will need to use the ip address of the ACE and the FWSM)

Have a good one.

Julio!!!!

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
1 REPLY

urgent help required-unable to ping(going to deploy ACE)

Hello Santosh,

I do not see anything wrong on the information you have provide us, now we can see that the FWSM is replying to all the ICMP request received from the ACE, next thing to do wiill be to create a capture on the FWSM to see if is seeing the traffic go and comming or if somehow is being blocked.

So please create the following capture:

access-list TEST permit icmp host ACE host FWSM

access-list TEST permit icmp host FWSM host ACE

capture TEST access-list TEST interface  ACE-FWSM

Also please create the following capture on the FWSM

capture asp type asp-drop all

And then provide us the following outputs:

1-Show capture TEST

2-Show capture asp | include ACE

Note: On this captures you will need to use the ip address of the ACE and the FWSM)

Have a good one.

Julio!!!!

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
433
Views
0
Helpful
1
Replies
CreatePlease login to create content