Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ssh access on multiple interfaces on soho 92 router

In my current config, I have:

ip ssh source-interface Ethernet0

Is it possible to configure ssh on both interfaces? The above command forces one to specify either ehternet0 or ehternet1, not both. Thus, with my current config, I can ssh to the soho92 from within my ipsec tunnel. However, I would also like to be able to ssh to my soho 92 from the external interface of my remote connection. I already have the ACLs setup on ethernet1 to allow this.

1 REPLY

Re: ssh access on multiple interfaces on soho 92 router

You can access the device on multiple interfaces with SSH (ACLs permitting).

I believe the command indicates the interface used when the Cisco device "initiates" an SSH connection.

We configure loopback interfaces as the source-interface(s) for almost all services (incl. SSH). That does not prevent us from accessing the device on any other interface (ACLs permitting).

211
Views
0
Helpful
1
Replies