Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

SSH Login

Hi, I have make a entry for SSH login or Telnet access on ASA to have rights to do configure tha ASA from outside network but I am not able to login from outside network. As I have done same setting for ASDM http and it is working fine.I am using putty software for this. Can anyone tell me whats a issue??

3 REPLIES
Community Member

Re: SSH Login

If you have configure SSH access exactly like HTTP and HTTP is working and not SSH then the only thing I can think of you do not have a Crypto key yet. In order for SSH to work you need to configure at least things: Hostname, Domain name and a Crypto key. At the CLI do this: "crypto key generate rsa modulus 1024 noconfirm".

Community Member

Re: SSH Login

How is it possible by using ASDM. Can you please send me the intructions where I have to make changes and is it require crypto setting in telnet case??

Community Member

Re: SSH Login

Here is a link to CCO that will show you have to configure that using the ASDM interface: "http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008069bf1b.shtml"

No you do not need crypto if you are using Telnet. But it is highly recommended that you use SSH if you are going to manage the security appliance using CLI. Otherwise everthing you do will be transmitted in clear text.

295
Views
0
Helpful
3
Replies
CreatePlease to create content