Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SSH on ASA5505

I have an ASA5505 running ver 8.0(2). I have configured the ssh timeout, ssh host commands and did the crypto key gen. I am unable to access the device from the host I am allowing. Is there like ca save all command required? I am trying to use the default pix and telnet password. Do those still work?

3 REPLIES
New Member

Re: SSH on ASA5505

Try this:

username auser password secret privilege 15

aaa authentication telnet console LOCAL

New Member

Re: SSH on ASA5505

For SSH you will need to enable a user and AAA on the ASA.

username auser password secret privilege 15

aaa authentication ssh console LOCAL

aaa authentication enable console LOCAL

aaa authorization command LOCAL

Re: SSH on ASA5505

Hi Bro

Are you able to SSH into your Cisco ASA Firewall now? If yes, please do rate the above peer's comments k :-)

Firstly, if you're unable to access the Cisco ASA Firewall via SSH, can you PING the interface, assuming it's INSIDE, interface? If yes, then perhaps, could be your Terminal Emulation software. I use PUTTY, and I noticed if I were to use crypto key generate rsa modulus 768, this is good but not good if I choose 1024, for example.

Please do rate this comment :-)

Warm regards, Ramraj Sivagnanam Sivajanam Technical Specialist/Service Delivery Manager – Managed Service Department
635
Views
0
Helpful
3
Replies
CreatePlease login to create content