Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

SSL VPN behind PIX 515

Hello,

I hope somebody can help with this

I have a SonicWall SSL-VPN 2000 behind a PIX 515 which I cannot access from outside.

The configuration is like this:

name x.x.x.x SSLVPN_Ext

name y.y.y.y SSLVPN_Int

static (inside,outside) SSLVPN_ext SSLVPN_Int netmask 255.255.255.255 0 0

access-list SonicWallVPN line 1 permit tcp any host SSLVPN_Ext eq https (hitcnt=0)

Thanks in advance

stephan

4 REPLIES
Bronze

Re: SSL VPN behind PIX 515

Configure following commands in PIX

static (inside,outside) SSLVPN_ext SSLVPN_Int netmask 255.255.255.255

access-list SonicWallVPN line 1 permit any host SSLVPN_Ext eq https

New Member

Re: SSL VPN behind PIX 515

though the answer seems to be dumb

is the ACL applied in outside interface in inward direction?

and configuring the NAT as

static (inside,outside) SSLVPN_ext 443 SSLVPN_Int 443 netmask 255.255.255.255 0 0

New Member

Re: SSL VPN behind PIX 515

Stephan,

I am experiencing the same thing. Did you ever get this to work?

Matt

New Member

Re: SSL VPN behind PIX 515

another silly check...

please try allowing HTTP as well towards the public IP and the below command

http 255.255.255.255

129
Views
0
Helpful
4
Replies
CreatePlease to create content