Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

Stateful Failover and DHCP bindings

Hello,

concers to FWSM, PIX, ASA5500series

in Active/Standby with Stateful Failover

I use the Firewall as DHCP Server.

Now I have several DHCP bindings on the Primary (active) Firewall.

Does the active Firwall copy the DHCP binding informations to the secondary?

So if there is a failover to the secondary - the old DHCP binding informations are not lost?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Stateful Failover and DHCP bindings

No. DHCPD bindings are NOT replicated to the standby unit.

2 REPLIES
Cisco Employee

Re: Stateful Failover and DHCP bindings

No. DHCPD bindings are NOT replicated to the standby unit.

New Member

Re: Stateful Failover and DHCP bindings

Thank you!

256
Views
0
Helpful
2
Replies
CreatePlease to create content