Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

Static Command

Hi Guys,

Could someone please explain the following command for me (if possible give me an example):

static (inside,DMZ1)10.1.10.1 10.1.10.1 netmask 255.255.255.0

Tks

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Static Command

It should be either

static (inside,DMZ1)10.1.10.1 10.1.10.1 netmask 255.255.255.0

or

static (inside,DMZ1)10.1.10.1 10.1.10.1 netmask 255.255.255.255

Which says that the inside host (10.1.10.1) or network 10.1.10.0/24 can look like themselves when they talk to the DMZ1. This is called Identity translation.

You can read about it here:

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/cfgnat.html#wp1043425

1 REPLY
Cisco Employee

Re: Static Command

It should be either

static (inside,DMZ1)10.1.10.1 10.1.10.1 netmask 255.255.255.0

or

static (inside,DMZ1)10.1.10.1 10.1.10.1 netmask 255.255.255.255

Which says that the inside host (10.1.10.1) or network 10.1.10.0/24 can look like themselves when they talk to the DMZ1. This is called Identity translation.

You can read about it here:

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/cfgnat.html#wp1043425

130
Views
0
Helpful
1
Replies
CreatePlease to create content