I have a vpn setup which is working on a Pix 535 firewall. I have more then 100 VPN accounts but my problem is that the vpn users are getting ip address from a common pool and i do not have control on the IP address. I want to configure the system in such a way that one a vpn id connect to the system should get the same ip address always which is defined by me so that i can implement the firewall policy on the basis of that ip . Presently i have to assign the policy on the vpn id groups...
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...