Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

static nat addresses - AUTOMATICALLY?

is there any way to create a "global nat" which allows static ip users to get the same nat'd address every time WITHOUT having to input EVERY one of static translations in the firewall?

can configuration be done that each of these address will static to each other one for one?

172.16.186.5 - 172.16.186.254 to 10.16.186.5 - 10.16.186.254

1 ACCEPTED SOLUTION

Accepted Solutions

Re: static nat addresses - AUTOMATICALLY?

Yes

3 REPLIES

Re: static nat addresses - AUTOMATICALLY?

You can't do discontinuous IP addresses. but what you could have is the whole /24:-

static (inside,outside) 10.16.186.0 172.16.186.0 netmask 255.255.255.0

This will map 1 to 1

HTH.

New Member

Re: static nat addresses - AUTOMATICALLY?

So doing static (inside,outside) 10.16.186.0 172.16.186.0 netmask 255.255.255.0 is the same as doing the following:

static 172.16.186.5 10.16.186.5 netmask 255.255.255.255

static 172.15.186.6 10.16.186.6 netmask 255.255.255.255

etc, etc

I am trying to find a solution which I dont have to input all the addresses for one-to-one static nat translation.

Let me know

Re: static nat addresses - AUTOMATICALLY?

Yes

113
Views
0
Helpful
3
Replies
CreatePlease login to create content