Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

Static NAT problem!!!

Hi,

I was using ASA5510/asa712-k8.bin. But i had problem with http inspect command.It didn't work properly.And also having

enabled OSPF on ASA cpu usage became 35%.

After downloading Asa721-24-k8.bin...Http

inspect and CPU load problems has been solved. But i got new problem. Static NAT

stopped to work.

static (dmz,outside) tcp GLOBAL_IP smtp Private_IP smtp netmask 255.255.255.255

It worked with previous image.

Has anybody got any idea about that?

2 REPLIES
New Member

Re: Static NAT problem!!!

Try changing to the following

static (dmz,outside) tcp interface smtp smtp netmask 255.255.255.255

New Member

Re: Static NAT problem!!!

Ok. Understood. Questions:

1.But if the Global IP isn't interface IP of ASA?

2. This is the bug of asa 7.2(1) ?

203
Views
0
Helpful
2
Replies
CreatePlease to create content